When our daily energy requirements are met by ‘Green Energy’, then we are using resources such as wind, tides or geothermal heat. When ‘Green’, they are all thought to be replenishable and natural. When considering elements such as Wind Power and Windmills, in many cases we are looking back at the history of energy production. This idea is preserved by the use of technology, eco-efficient options and planet friendly alternatives.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Thermal Solar Energy – This technology is based around two core types of system. First, we have Solar Water Heating Collectors, which absorb energy from the Sun and transfer this into hot water. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels – which transform solar radiation into electricity. Typically, these panels are found on roofs – and need to be away from any light blocks such as trees, chimneys and other buildings.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. Solar Water heating systems are extremely important – and can provide over half of the hot water needs for houses within the UK. The typical cost for installation ranges from 500-1500 pounds for a DIY system, all the way through to 2-5k for a professional fit.

Biomass Energy Technology: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Due to its adaptability, it can produce a range of energy forms – from heat and electricity through to combinations of both. It is interesting to note that the UK has some of the largest quantities of Biomass material to generate electricity within Europe. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Also producing high yields of dry matter are the perennial grasses. Other less known materials within this field are Agricultural and Municipal Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.

Systems Using Geo-Thermal Energy – The constant energy of the Sun heating the Earth results in both warm water and electricity being produced. Within the UK, the constant ground source heat temperature is around 12 degrees centigrade – and can be utilised to both heat and cool buildings. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. By using energy from solar electrical panels or wind turbines to power them, heat source pumps can be almost 100 percent renewable in energy production.

Systems Based On Wind Energy: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. In the European union, it is the UK which is seen to have the largest wind capacity. Although, within the UK we currently only utilise 1 percent of electricity from wind, yet the potential rests at a surprising 10 percent. Instead of producing electricity at a rate of 2-10p per kWh, we could be generating at 2p per kWh. From this, the estimation of the cost recovery period is around 6-9 months overall.

Lastly, we have a discipline that the UK does well – namely Hydropower. Energy creation from moving water is very old – although it is now being done in new ways. It is this type of energy production that could meet 2 percent of all the UK’s demand.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.

It is the growing worldwide energy requirement that is causing the growth in ‘Green Energy’. The UK remains one of the main beneficiaries of this technology.

With the bulk of development work in the domestic area, both Plumbers and Electricians are set to capitalise in this area. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

Copyright Scott Edwards 2009. Go to Solar Energy Courses or www.electricaltraininginfo.co.uk/SolarEnergyTraining.html.